Various Angle IR Housing S-SD8-IR

Please strictly follow the below instructions when install this product!1. Description• Accurate constant circuit drive develops excellent performance of LED; Using high power LED,Website:http://www.led-illuminator.com, high efficacy and long service life; • Fill light for night vision camera • Indoor/outdoor use• Easy installation2. SpecificationQuantity of LED8PCS 2W High Power IR LEDWavelength740nm/850nm/940nmBeam angle15°- 90°IR Distance140m-40m(850nm)Day/night switchCDS 10-20lux ±10%Input VoltageAC110-220V/AC24V/DC12V optionsPower consumption25W(850nm)WireIf 12VDC/24VAC:45cm(1.4 ft.)PlugAC110-220Vstandard), other voltage optionalPanelTempered glass panelHousingAluminum Die Casting HousingBracketMount bracketWorking temperatures-30℃ TO +50℃(-50℃ TO +50℃ with heater)Protection LevelIP65ColorWhiteN.W2.7KGG.W3.4KGPacking dimension450*265*225mmBracket (options)Material: Aluminium AlloySize: 360*90*90mmN.W./G.W.: 0.4kg/0.7kg3. Installation1. The product includes fragile parts. Take care on every transportation steps and hold carefully, do not stress!2. Ensure operating voltage and current are proper before installation.3. Install the product on the holder by fixing the mount hold with screws directly. 4. Adjust the angle of product by loosing screws on bracket. 5. Link power wires tightly and make it waterproof to avoid electric shock.6. Connect with extra power wire should make it waterproof at the same. 7. The outlet of power wire should be installed downward.8. Don't use against any fire precaution rules during operation. 9. Installation requested professional operation and qualified personnel.10. Connect our sales person if you need additional parts for installation.Maintenance 1. Cut off power before maintenance.2. Clean the glass regular to get better transmission of light. 3.Clean the housing to get well heat dissipation performance. 4. Clean by dry dishcloth, don't use water or strong corrosive solution.Night vision picturesNight time with IR Camera HousingNight time without IR Camera Housing 4. Installation and adjustment(1). Internal PicturePut on the camera on the lift bracket, adjust the height of camera and fix the screws.(2). Wires① BNC Video Signal Wire: Connect to the video signal wire of camera② Power Wire: Power output to camera(DC12V/AC220V to be ordered)③ BNC Video Signal Wire: Connect to the monitor.④ Power Plug: Link to power sources(DC12V/AC24V/AC220V to be ordered)(3). Dimension of inside camera(4). Adjustment①Turn counter clockwise to increase the sensitive of IR sensor.②Adjust the current of LED PCB, increase current by turn clockwise and decrease by counter clockwise. Increase the current, the power of LED will increase too.5. Dimension6. Models for selectionModelBeam AngleIR Distance(850nm)S-SD8-15-IR15°140mS-SD8-30-IR30°100mS-SD8-45-IR45°80mS-SD8-60-IR60°70mS-SD8-90-IR90°40mS-SD8-120-IR120°25m* IR distance is tested by SONY 1/3" CCD Camera. To achieve the distance needed, please pay attention to your camera specification and lens before purchase. It is normal phenomenon that distance may vary due to different cameras and lens. Our product is weatherproof and dustproof. Do not modify the shape, dismantle or reconfigure the product, any inflow of water cause by which are not be responsible for warranty repair.